View 15ETH06PBF_4124142.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20886 rev. A 10/06
15ETH06PBF 15ETH06FPPbF
Hyperfast Rectifier
Features
* * * * * * * Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature Single Die Center Tap Module UL E78996 approved Lead-Free ("PbF")
trr = 22ns typ. IF(AV) = 15Amp VR = 600V
Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
VRRM IF(AV) IFSM IFM TJ, TSTG Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 140C @ TC = 80C (FULLPACK) Non Repetitive Peak Surge Current @ TJ = 25C (FULLPACK) Peak Repetitive Forward Current Operating Junction and Storage Temperatures 120 180 30 - 65 to 175 C
Max
600 15
Units
V A
Case Styles
15ETH06PBF
15ETH06FPPbF
Base Cathode
2
1
1 3
3
Cathode
Anode
Cathode
Anode
TO-220AC www.irf.com
TO-220 FULLPACK 1
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameters
VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage
Min Typ Max Units Test Conditions
600 1.8 1.3 0.2 30 20 8.0 2.2 1.6 50 500 V V V A A pF nH IR = 100A IF = 15A, TJ = 25C IF = 15A, TJ = 150C VR = VR Rated TJ = 150C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body
IR
Reverse Leakage Current
-
CT LS
Junction Capacitance Series Inductance
-
Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified)
Parameters
trr Reverse Recovery Time
Min Typ Max Units Test Conditions
22 28 29 75 3.5 7 57 300 51 20 580 30 35 ns A nC TJ = 125C nC A ns IF = 1A, diF/dt = 100A/s, VR = 30V IF = 15A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 15A diF /dt = 800A/s VR = 390V IF = 15A diF /dt = 200A/s VR = 390V
IRRM
Peak Recovery Current
-
Qrr
Reverse Recovery Charge
-
trr IRRM Qrr
Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge
-
Thermal - Mechanical Characteristics
Parameters
TJ TStg RthJC RthJA RthCS Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Mounting Torque Per Leg Per Leg (Fullpack) Per Leg
Min
- 65 6.0 5.0
Typ
1.0 3.0 0.5 2.0 0.07 -
Max
175 175 1.3 3.5 70 12 10
Units
C C/W
g (oz) Kg-cm lbf.in
Typical Socket Mount Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
100
Reverse Current - I R (A)
1000 100 10 1 0.1
25C T J = 175C 150C 125C 100C
Instantaneous Forward Current - I F (A)
0.01
0.001
T = 175C J
0 0 100 200 300 400 500 600
Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage
10
T = 150C J T = 25C J
1000
Junction Capacitance - C T (pF)
T J = 25C
100
1 0.5
10
1
1.5
2
2.5
3
0
100
200
300
400
500
600
Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
10
Thermal Impedance Z thJC (C/W)
1
0.1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
Notes:
PDM
t1 t2
Single Pulse (Thermal Resistance)
1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
1
10
www.irf.com
3
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
10
Thermal Impedance Z thJC (C/W)
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance)
Notes:
PDM
t1 t2
0.1
1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK)
0.0001
100
180
Allowable Case Temperature (C) Allowable Case Temperature (C)
180 160 140 120 100 80 60 Square wave (D = 0.50) 40 80% Rated Vr applied 20 see note (3) 0 0 4 8 12 16 20 24
DC
170 160
DC
150 140 130 80% Rated Vr applied 120 see note (3) 110 0 5 10 15 20 25
Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current
Square wave (D = 0.50)
Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK)
35
Average Power Loss ( Watts )
30 25 20 15 10 5 0 0 5 10 15 20 25 Average Forward Current - IF(AV) (A)
D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC
(3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
RMS Limit
Fig. 8 - Forward Power Loss Characteristics
4
www.irf.com
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
100
IF = 30 A IF = 15 A
1000
V R = 390V T J = 125C T J = 25C
80
800
IF = 30 A IF = 15 A
40
Qrr ( nC )
V R = 390V T J = 125C T J = 25C
60
trr ( ns )
600
400
20
200
0 100
di F /dt (A/s )
1000
0 100
di F /dt (A/s )
1000
Fig. 7 - Typical Reverse Recovery vs. di F /dt
Fig. 8 - Typical Stored Charge vs. di F /dt
Reverse Recovery Circuit
VR = 200V
0.01 L = 70H D.U.T. dif/dt ADJUST
diF /dt
D G IRFP250 S
Fig. 11- Reverse Recovery Parameter Test Circuit
www.irf.com
5
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
3
IF 0
trr ta tb
4
Q rr
2
I RRM
0.5 I RRM di(rec)M/dt 0.75 I RRM
5
1
diF /dt f
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 12 - Reverse Recovery Waveform and Definitions
Outline Table
Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches)
6
www.irf.com
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
Outline Table
10.6 10.4 HOLE o 3.4 3.1 2.8 2.6
3.7 3.2
1
7.1 6.7
3
Cathode
15.8
Anode
16.4
15.4
16.0
10
3.1 3.3
13.7
2.54 TYP.
0.9 0.7 2.54 TYP.
0.48 0.44 2.85 2.65
1.15 1.4 1.3 1.05
TYP
R0.7 (2 PLACES) R0.5
4.8 4.6
Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches)
5 0.5 5 0.5
Part Marking Information (TO-220)
IRXC Assembly Line EXAMPLE: THIS IS A 15ETH06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY LOT CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C PART NUMBER
IRMX Assembly Line EXAMPLE: THIS IS A 15ETH06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO
PART NUMBER
DATE CODE ASSEMBLY LOT CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE
13.5
www.irf.com
7
15ETH06PBF, 15ETH06FPPbF
Bulletin PD-20886 rev. A 10/06
Part Marking Information (TO-220 FULL-PAK)
EXAMPLE: THIS IS A 15ETH06FP LOT CODE 1789 ASSEMBLED ON WW 19, 2002 IN THE ASSEMBLY LINE "C" PART NUMBER FP = Fullpack
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
DATE CODE YEAR = 2002 WEEK 19 P = Lead-Free
Ordering Information Table
Device Code
15
1 1 2 3 4 5 6 7 -
E
2
T
3
H
4
06
5
FP
6
PbF
7
Current Rating (15 = 15A) E T H = Single Diode = TO-220, D2Pak = HyperFast Recovery none = TO-220AC FP = TO-220 FULLPACK none = Standard Production PbF = Lead-Free
Voltage Rating (06 = 600V)
Tube Standard Pack Quantity: 50 pieces
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/06
8
www.irf.com

▲Up To Search▲

Price & Availability of 15ETH06PBF

	To Download 15ETH06PBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .